This heavy-duty 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for critical pulling and lifting applications. Its substantial 0.593" thickness ensures reliability under extreme loads.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.593" |
| Length | 27" |
| Width | 45" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.593 inches thick, 27 inches in length, and 45 inches in width. Manufactured from AISI 304 stainless steel, it exhibits excellent tensile strength and a high yield point, making it ideal for components subjected to significant static and dynamic loads in marine, industrial, and construction environments. Its inherent passivation layer offers superior resistance to oxidation and corrosion, ensuring long-term performance in harsh conditions. The precise dimensions facilitate seamless integration into custom fabricated lifting equipment, structural supports, and heavy-duty bracing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage prior to cutting or fabrication. 2. Utilize appropriate cutting tools for stainless steel (e.g., abrasive cut-off saw, plasma cutter). 3. Fabricate to specific design requirements, ensuring all welds and connections are rated for the intended load capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools that can cause carbon contamination and lead to rust. | Employ dedicated stainless steel cutting tools and ensure a clean work environment to prevent contamination. |
| Overheating the material during fabrication, which can alter its metallurgical properties and reduce corrosion resistance. | Use appropriate heat management techniques during welding and cutting, such as intermittent welding and cooling. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom lifting hardware fabrication, Heavy-duty structural supports, Marine deck fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||