This robust 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Precisely fabricated to 0.991" thickness, 27" length, and 28" width, it's ideal for custom fabrications in critical pressure and temperature control systems.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.991" |
| Length | 27" |
| Width | 28" |
A high-performance industrial component, this 304 stainless steel stock sheet is engineered for superior durability and reliability in demanding environments. Measuring 0.991 inches thick, 27 inches in length, and 28 inches in width, it exhibits excellent tensile strength and fatigue resistance. The inherent passivation layer of 304 stainless steel provides exceptional corrosion resistance against a wide range of chemicals and atmospheric conditions, making it suitable for high-pressure vessels, heat exchangers, and complex piping systems where precise material integrity is paramount for maintaining operational safety and efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface ensuring it is clean, dry, and free of contaminants. 2. Accurately cut the stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the cut sheet using high-strength, corrosion-resistant fasteners suitable for the application's pressure and temperature ratings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are not rated for the operating pressure or temperature. | Always select fasteners made from materials compatible with 304 stainless steel and rated for the system's maximum operating conditions to prevent premature failure. |
| Inadequate edge preparation leading to stress concentrations. | Ensure all cut edges are deburred and smoothed to eliminate sharp corners and potential points of stress risers, which can compromise structural integrity under load. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||