High-grade 304 stainless steel stock sheet, precisely manufactured to 0.219-inch thickness, 36-inch length, and 36-inch width. Ideal for demanding hydraulic environments requiring superior corrosion resistance and structural integrity.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.219" |
| Length | 36" |
| Width | 36" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers exceptional performance in corrosive and high-pressure hydraulic systems. The 0.219" thickness provides robust structural support, while the inherent properties of 304 stainless steel ensure excellent resistance to oxidation and chemical attack. Its non-magnetic nature and formability make it suitable for custom fabrication of critical hydraulic components, manifolds, and fluid containment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants. 2. Precisely cut to required dimensions using appropriate fabrication tools. 3. Integrate into the hydraulic system design, adhering to all welding and sealing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive hydraulic fluid environments. | Always specify 304 stainless steel for superior corrosion resistance and system longevity. |
| Inadequate surface preparation before welding. | Thoroughly clean and degrease the welding area to prevent contamination and ensure strong joint integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifolds, Fluid Reservoirs, Pressure Vessels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||