Engineered for robust hydraulic applications, this 304 stainless steel stock sheet offers superior corrosion resistance and structural integrity. Its substantial 0.798" thickness ensures dependable performance under high-pressure conditions.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.798" |
| Length | 34" |
| Width | 34" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet is a critical component for advanced hydraulic systems requiring exceptional durability and resistance to corrosive environments. Measuring 0.798 inches thick, with dimensions of 34 inches by 34 inches, it provides ample material for custom fabrication. The 304 grade offers excellent tensile strength and a high degree of passivation, making it ideal for fluid power applications where contamination and material degradation are unacceptable. Its non-magnetic properties and smooth surface finish contribute to reliable system operation and extended component lifespan.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare cutting and forming equipment according to safe operating procedures. 3. Accurately cut the stock sheet to the required component dimensions, ensuring clean edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify 304 or higher grade stainless steel for hydraulic components exposed to moisture, chemicals, or saltwater. |
| Inadequate edge preparation after cutting. | Deburr and smooth all cut edges to prevent stress risers and potential leaks in hydraulic systems. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifolds, Hydraulic Reservoirs, Pressure Vessels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||