This premium 304 stainless steel stock sheet offers exceptional strength and corrosion resistance, making it the ideal material for critical components in harsh hydraulic environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.858" |
| Length | 22" |
| Width | 43" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.858 inches thick, 22 inches in width, and 43 inches in length. The 304 alloy provides excellent resistance to a wide range of corrosive media, including atmospheric conditions, many organic and inorganic chemicals, and food processing environments. Its high tensile strength and ductility ensure reliable performance under high pressure and dynamic loads characteristic of hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is free from any surface contaminants or damage. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools and techniques. 3. Deburr all cut edges to prevent stress risers and ensure smooth operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel in corrosive hydraulic fluid environments. | Always specify 304 stainless steel or higher for components exposed to corrosive hydraulic fluids and demanding conditions. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to prevent premature fatigue failure and ensure proper sealing. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold blocks, Pressure vessel components, Corrosion-resistant hydraulic fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||