This 0.430-inch thick 304 stainless steel sheet provides exceptional durability and corrosion resistance, ideal for robust hydraulic component fabrication and demanding industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.430" |
| Length | 17" |
| Width | 38" |
A high-performance industrial component, this 304 stainless steel stock sheet features precise dimensions of 0.430 inches thick, 17 inches in length, and 38 inches in width. Engineered from Grade 304 stainless steel, it offers excellent tensile strength, a high yield point, and superior resistance to a wide range of corrosive media commonly found in hydraulic fluid systems. Its non-magnetic properties and formability make it suitable for custom fabrication of manifolds, valve bodies, and other critical hydraulic assemblies requiring long-term reliability and structural integrity in challenging operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface of the sheet thoroughly, ensuring no contaminants are present. 2. Precisely cut or machine the sheet to the required dimensions for the hydraulic component. 3. Deburr all edges to prevent material fatigue and ensure smooth transitions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic components exposed to corrosive fluids. | Always utilize 304 stainless steel or a comparable corrosion-resistant alloy for hydraulic parts in aggressive environments to prevent premature failure. |
| Inadequate edge preparation after cutting, leading to stress risers. | Thoroughly deburr and radius all cut edges to maintain the material's structural integrity and prevent crack propagation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Valve Body Construction, Hydraulic Cylinder Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||