Engineered for extreme environments, this 0.998" thick 304 stainless steel stock sheet offers exceptional corrosion resistance and tensile strength for critical pulling and lifting operations.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.998" |
| Length | 20" |
| Width | 16" |
Specified by design engineers worldwide, this 0.998-inch thick stock sheet is manufactured from premium 304 stainless steel, a martensitic alloy renowned for its excellent corrosion resistance, weldability, and superior strength-to-weight ratio. Measuring 20 inches in length and 16 inches in width, this sheet is precisely fabricated to meet stringent industrial standards. Its robust composition makes it ideal for fabricating custom lifting eyes, brackets, reinforcement plates, and structural components subjected to corrosive atmospheres, high loads, and frequent stress cycles in marine, chemical processing, and heavy manufacturing environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended environment and load requirements. 2. Prepare mounting surfaces to ensure a clean and structurally sound interface. 3. Securely fasten the sheet using appropriate high-strength, corrosion-resistant hardware, considering shear and tensile load ratings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which will corrode and compromise structural integrity. | Always utilize 304 or 316 stainless steel fasteners rated for the calculated loads. |
| Improperly welding or cutting, leading to potential weakening of the stainless steel's corrosion resistance. | Employ appropriate welding techniques and cutting methods for 304 stainless steel to maintain its inherent protective oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Lifting Fixtures, Reinforcement Plates for Heavy Machinery, Marine Hardware Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||