Engineered for extreme environments, this 0.994" thick 304 stainless steel stock sheet offers superior strength and corrosion resistance, making it ideal for robust pulling and lifting applications where reliability is paramount.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.994" |
| Length | 46" |
| Width | 35" |
Specified by design engineers worldwide, this premium 304 stainless steel stock sheet boasts exceptional mechanical properties. With a nominal thickness of 0.994 inches, a length of 46 inches, and a width of 35 inches, it meets stringent industry standards for structural integrity. Its 304 austenitic stainless steel composition provides excellent resistance to a wide range of corrosive agents, high tensile strength for demanding loads, and formability for custom fabrication. This sheet is designed for applications requiring robust material performance in harsh atmospheric and chemical conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly supported to prevent sagging during handling. 2. Utilize appropriate lifting equipment rated for the sheet's substantial weight and dimensions. 3. Fabricate and install according to project-specific engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lifting equipment for the sheet's weight. | Always verify lifting equipment capacity against the calculated weight of the 304 stainless steel stock sheet. |
| Inadequate surface protection during fabrication, leading to scratches or contamination. | Employ protective films or coverings during cutting, welding, and finishing processes to maintain surface integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural components in marine environments, Custom fabricated lifting beams and spreaders, Reinforcement plates for industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||