This premium 304 stainless steel stock sheet offers superior corrosion resistance and structural integrity, making it ideal for robust hydraulic system components and demanding industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.900" |
| Length | 40" |
| Width | 29" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.900 inches in thickness, 40 inches in length, and 29 inches in width. Composed of an austenitic chromium-nickel alloy, it exhibits excellent resistance to a broad spectrum of corrosive media, including water, most organic and inorganic chemicals, and oxidizing solutions. Its high tensile strength and formability ensure reliable performance in high-pressure hydraulic manifolds, valve bodies, and structural supports where material longevity and fluid containment are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, dry, and free of contaminants. 2. Align the stock sheet precisely according to design specifications. 3. Secure the sheet using appropriate fastening methods (welding, bolting) as dictated by the hydraulic system's operational parameters.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel that may corrode in hydraulic fluid. | Always select 304 stainless steel or higher for hydraulic applications to ensure long-term corrosion resistance and system integrity. |
| Inadequate surface preparation leading to poor sealing or joint failure. | Thoroughly clean and degrease all surfaces before assembly to guarantee a secure and leak-free hydraulic connection. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Valve Bodies and Housings, High-Pressure Fluid Containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||