Engineered from robust 304 stainless steel, this stock sheet is designed for high-demand pulling and lifting operations. Its substantial thickness and dimensions provide superior load-bearing capacity and longevity in corrosive environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.885" |
| Length | 15" |
| Width | 26" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a precise thickness of 0.885 inches, a length of 15 inches, and a width of 26 inches. The inherent properties of 304 stainless steel, including its excellent corrosion resistance, tensile strength, and formability, make it ideal for applications where structural integrity under stress and exposure to harsh conditions are critical. This sheet is suitable for custom fabrication of heavy-duty lifting lugs, structural reinforcement in marine or chemical processing equipment, and robust mounting plates for industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the stock sheet according to the design specifications. 3. Secure the sheet using appropriate high-strength fasteners (e.g., bolts, welding) rated for the intended load capacity and environmental conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners for securing the sheet. | Always utilize fasteners with a tensile strength and material composition that matches or exceeds the requirements of the 304 stainless steel sheet and the anticipated load. |
| Failing to consider the corrosive environment during fastener selection. | Select fasteners made from 304 stainless steel or a compatible, equally corrosion-resistant alloy to prevent galvanic corrosion and ensure long-term joint integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty lifting lugs fabrication, Structural reinforcement in corrosive environments, Custom mounting plates for industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||