This robust 304 stainless steel stock sheet is engineered for superior performance in high-stress pulling and lifting applications. Its substantial 0.875-inch thickness ensures exceptional load-bearing capacity and longevity in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.875" |
| Length | 16" |
| Width | 38" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet offers unparalleled strength and corrosion resistance for critical lifting and pulling operations. Measuring 0.875 inches in thickness, 16 inches in width, and 38 inches in length, it is fabricated from high-grade 304 stainless steel, renowned for its excellent tensile strength, ductility, and resistance to a wide range of corrosive agents. This makes it an ideal component for custom fabrication of lifting frames, winch bases, and heavy-duty rigging hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of contaminants. 2. Accurately position the stock sheet according to design specifications. 3. Secure the stock sheet using appropriate high-strength fasteners, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for critical load-bearing points. | Always utilize fasteners with a tensile strength rating that exceeds the expected load requirements and is compatible with the stainless steel sheet's grade. |
| Inadequate surface preparation leading to poor adhesion or stress concentration. | Thoroughly degrease and deburr all surfaces that will be in contact during assembly to ensure optimal contact and prevent premature wear. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom lifting frame fabrication, Heavy-duty winch base construction, Reinforcement for industrial rigging points.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||