This 0.820-inch thick 304 stainless steel stock sheet, measuring 13" x 43", is engineered for demanding pressure and temperature control systems. Its robust construction ensures superior performance and longevity in critical environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.820" |
| Length | 13" |
| Width | 43" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet offers exceptional dimensional stability with a thickness of 0.820 inches, a length of 13 inches, and a width of 43 inches. Fabricated from AISI 304 stainless steel, it provides excellent corrosion resistance, superior strength, and reliable performance across a wide temperature range, making it ideal for pressure vessels, heat exchangers, and industrial piping where precise material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Prepare mounting or fabrication surfaces, ensuring they are clean and free from contaminants. 3. Fabricate or install the sheet according to approved engineering drawings and relevant industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for stainless steel, leading to work hardening and deformation. | Utilize carbide-tipped or high-speed steel cutting tools specifically designed for stainless steel. Ensure proper feed rates and cooling lubricants are employed. |
| Inadequate surface preparation before welding or joining, resulting in porosity or weak bonds. | Thoroughly clean all surfaces to be joined using appropriate solvents to remove oils, grease, and any protective coatings. Stainless steel wire brushes should be used exclusively for cleaning. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting and enclosures, Industrial manifold construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||