This 304 stainless steel stock sheet provides robust performance for critical pressure and temperature control systems. Its high-grade material ensures long-term reliability and resistance to demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.031" |
| Length | 17" |
| Width | 43" |
Built to exacting engineering tolerances, this 0.031" thick sheet of 304 stainless steel offers exceptional dimensional stability and uniformity. The material's inherent properties include excellent corrosion resistance, particularly against a wide range of chemicals and atmospheric conditions, as well as good formability and weldability. This makes it a prime choice for fabricating components in high-pressure, high-temperature environments, such as heat exchangers, control valve bodies, and custom manifold systems where precise fit and reliable operation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the sheet, aligning it with pre-drilled holes or guides. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to localized stress and potential deformation of the sheet. | Use a torque wrench to apply specified torque values to all fasteners, ensuring uniform clamping force. |
| Using incompatible cleaning agents that can cause surface etching or corrosion. | Clean the stainless steel with mild detergents and water, or specialized stainless steel cleaners. Avoid abrasive pads or harsh chemicals. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting and enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||