This 0.777" thick 304 stainless steel stock sheet, measuring 44" x 16", is engineered for superior performance in critical hydraulic systems. Its robust construction ensures long-term reliability and corrosion resistance.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.777" |
| Length | 44" |
| Width | 16" |
Precision-manufactured to tight tolerances, this 0.777" thick, 44" long, and 16" wide 304 stainless steel stock sheet offers exceptional dimensional stability crucial for high-pressure hydraulic environments. The 304 grade provides excellent corrosion resistance against a wide range of fluids and atmospheric conditions, preventing premature failure due to oxidation or chemical attack. This material's inherent strength and formability allow for custom fabrication of critical hydraulic components such as manifolds, valve bodies, and structural supports, where integrity and longevity are paramount. Its smooth surface finish minimizes fluid friction and potential contamination.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully inspect the stock sheet for any surface defects or dimensional inconsistencies. 2. Mark cutting lines according to design specifications using a suitable marking tool. 3. Utilize appropriate cutting methods (e.g., waterjet, plasma, or abrasive cutting) to achieve precise dimensions, ensuring minimal heat-affected zones. 4. Deburr all cut edges thoroughly to prevent stress risers and ensure smooth fluid flow.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inaccurate cutting leading to out-of-tolerance dimensions. | Verify all measurements and use calibrated cutting equipment for each operation. |
| Failure to deburr edges, causing potential fluid turbulence or component damage. | Ensure all cut edges are meticulously deburred and smoothed after fabrication. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Valve Bodies and Components, High-Pressure System Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||