Engineered for extreme environments, this robust 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for critical pulling and lifting operations. Its substantial dimensions ensure broad surface area for secure mounting and load distribution.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.760" |
| Length | 31" |
| Width | 37" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a material composition compliant with ASTM A240 standards, offering superior tensile strength and yield strength suitable for high-stress pulling and lifting applications. The precise dimensions of 0.760" (19.3 mm) thickness, 31" (787.4 mm) length, and 37" (939.8 mm) width ensure compatibility with a wide range of industrial setups. Its inherent resistance to pitting and crevice corrosion in saline and acidic environments makes it ideal for marine, chemical processing, and offshore operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface to ensure it is clean, level, and structurally sound. 2. Precisely position the stock sheet, aligning all mounting holes with pre-drilled or designated attachment points. 3. Securely fasten the stock sheet using appropriate grade fasteners (e.g., high-strength bolts and locking nuts) that are compatible with 304 stainless steel and the intended load capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade fasteners that cannot withstand the operational load. | Always specify and use fasteners with a tensile strength and material rating that meets or exceeds the requirements of the pulling or lifting application and is compatible with 304 stainless steel. |
| Inadequate surface preparation leading to uneven stress distribution and potential failure. | Thoroughly clean and de-grease the mounting surface, ensuring it is flat and free from any debris or imperfections that could compromise the integrity of the installation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty winch anchor plates, Custom marine deck hardware for towing, Industrial lifting and rigging components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||