This robust 0.720-inch thick 304 stainless steel stock sheet is engineered for extreme durability in pulling and lifting applications. Its superior corrosion resistance ensures longevity in harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.720" |
| Length | 35" |
| Width | 31" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet boasts a substantial 0.720-inch thickness, a 35-inch length, and a 31-inch width, yielding a robust surface area and exceptional load-bearing capacity. Composed of ASTM A240 Type 304, it exhibits excellent tensile strength (minimum 520 MPa) and yield strength (minimum 205 MPa), along with superior resistance to pitting and crevice corrosion due to its 18% chromium and 8% nickel content. This makes it ideal for fabricated components in marine environments, chemical processing, and heavy-duty industrial lifting equipment where structural integrity and material longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free from debris. 2. Verify the sheet's dimensions and material integrity against project requirements. 3. Securely fasten the sheet using appropriate industrial-grade mounting hardware designed for the intended load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which will corrode and compromise the stainless steel assembly. | Always use 304 or 316 grade stainless steel fasteners to maintain the corrosion resistance of the entire assembly. |
| Exceeding the calculated load capacity based on the sheet's material properties and supporting structure. | Perform thorough structural analysis and adhere strictly to engineered load ratings, incorporating a safety factor. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of lifting lugs and brackets, Reinforcement plates for heavy-duty machinery, Structural components in corrosive industrial environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||