This 0.718-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it a robust solution for heavy-duty pulling and lifting operations.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.718" |
| Length | 46" |
| Width | 33" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet provides exceptional durability and resistance to environmental degradation. With a precise thickness of 0.718 inches, a substantial length of 46 inches, and a width of 33 inches, it meets stringent dimensional tolerances for critical structural components. The inherent properties of 304 stainless steel, including its excellent formability and weldability, ensure reliable performance in corrosive atmospheres and demanding tensile load scenarios common in industrial pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Utilize appropriate cutting and forming tools designed for thick stainless steel. 3. Employ certified welding procedures and consumables for secure joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always use 304 stainless steel fasteners or compatible alloys for assembly. |
| Improper handling leading to surface scratches or dents, compromising aesthetic and potential stress concentration points. | Handle with care using appropriate lifting equipment and protective coverings. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural components for heavy-duty cranes and hoists, Reinforcement plates for rigging and lifting assemblies, Custom fabricated parts for marine and offshore pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||