This 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Precisely manufactured to 0.712" thickness, it's engineered for demanding pressure and temperature control environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.712" |
| Length | 24" |
| Width | 25" |
A proven choice for industrial professionals, this 304 stainless steel stock sheet is manufactured to exacting standards for reliability in critical applications. Measuring 0.712 inches thick, 24 inches in length, and 25 inches in width, it provides substantial material for fabrication. The inherent properties of 304 stainless steel, including its excellent resistance to oxidation and a wide range of corrosive media, make it indispensable for systems operating under elevated pressures and temperatures. Its ductile nature ensures ease of fabrication for forming complex components, while its high tensile strength guarantees structural integrity under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Prepare mating surfaces for welding or joining, ensuring they are clean and free from contaminants. 3. Execute fabrication and joining procedures according to relevant industry codes and best practices for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for 304 stainless steel. | Always use welding consumables specifically rated for 304 stainless steel to maintain corrosion resistance and mechanical properties. |
| Inadequate post-weld cleaning, leading to potential corrosion. | Thoroughly clean all post-weld areas to remove slag, spatter, and heat tint, which can compromise the protective oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, High-temperature ducting systems, Corrosive fluid containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||