This 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Precisely fabricated, it's ideal for robust pulling and lifting applications where material integrity is paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.700" |
| Length | 27" |
| Width | 22" |
Built to exacting engineering tolerances, this 0.700" thick sheet, measuring 27" in length and 22" in width, is constructed from premium 304 stainless steel. This austenitic alloy provides superior tensile strength and excellent resistance to pitting and crevice corrosion, even in harsh marine or chemical environments. The material's non-magnetic properties and high ductility ensure reliable performance under significant load stresses. Its precise dimensions make it suitable for custom fabrication of heavy-duty pulling mechanisms, lifting lugs, and structural components in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or protective coatings. 2. Position the sheet accurately according to design specifications for the pulling or lifting apparatus. 3. Secure the sheet using appropriate high-strength fasteners or welding techniques, ensuring full structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor weld adhesion or fastener seating. | Always degrease and clean all surfaces meticulously before any joining process. |
| Over-tightening fasteners, which can deform the sheet or compromise its structural integrity. | Utilize calibrated torque wrenches to achieve specified fastener tension without over-stressing the material. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of heavy-duty pulling eyelets, Structural reinforcement for lifting points, Components for industrial hoists and cranes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||