Precision-engineered 304 stainless steel stock sheet, offering superior corrosion resistance and mechanical strength for critical hydraulic system components and fabrication.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.692" |
| Length | 45" |
| Width | 40" |
Specified by design engineers worldwide, this 0.692-inch thick, 45-inch long, and 40-inch wide stock sheet is manufactured from premium 304 stainless steel. This austenitic alloy provides excellent resistance to atmospheric corrosion, many organic and inorganic chemicals, and food processing environments. Its high tensile strength and formability make it ideal for fabricating robust hydraulic manifolds, custom fittings, pressure vessels, and structural components requiring a balance of performance and longevity under demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with surrounding hydraulic fluids and system pressures. 2. Ensure clean and deburred edges prior to any cutting or machining. 3. Follow standard fabrication practices for 304 stainless steel, including appropriate welding and fastening techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive hydraulic environments. | Always specify 304 stainless steel for superior corrosion resistance and extended service life in hydraulic systems exposed to aggressive media. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and smooth all cut edges to prevent stress risers and potential leak paths in fabricated components. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Fitting Production, Pressure Vessel Construction, Corrosion-Resistant Hydraulic Componentry.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||