This robust 304 stainless steel stock sheet is engineered for superior strength and corrosion resistance in demanding pulling and lifting scenarios.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.684" |
| Length | 36" |
| Width | 15" |
Purpose-built for heavy-duty applications, this 0.684-inch thick, 36-inch long, and 15-inch wide 304 stainless steel stock sheet offers exceptional tensile strength and a high yield point. Its inherent corrosion resistance, stemming from its chromium and nickel content, makes it ideal for environments exposed to moisture, chemicals, and saltwater. This material is commonly employed in marine hardware, industrial rigging, and structural components requiring reliable load-bearing capacity and longevity. The substantial gauge ensures exceptional rigidity and resistance to deformation under extreme stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound to support the intended load. 2. Precisely mark and drill mounting holes according to the design specifications, using appropriate drill bits for stainless steel. 3. Securely fasten the sheet using high-strength, corrosion-resistant fasteners (e.g., 304 stainless steel bolts and nuts) with appropriate torque settings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which will corrode and compromise the integrity of the assembly. | Always utilize 304 stainless steel fasteners to maintain corrosion resistance and ensure long-term structural integrity. |
| Improperly drilling holes, leading to stress concentrations or burrs that can initiate corrosion. | Use sharp drill bits designed for stainless steel, drill at appropriate speeds, and deburr all edges thoroughly after drilling. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty winch components, Marine hardware fabrication, Industrial lifting equipment reinforcement.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||