This robust 304 stainless steel stock sheet provides superior strength and corrosion resistance, ideal for custom fabrication in demanding pulling and lifting environments. Its substantial dimensions ensure ample material for diverse project needs.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.668" |
| Length | 47" |
| Width | 43" |
Engineered for reliability and performance, this 0.668-inch thick sheet of 304 stainless steel offers exceptional tensile strength and a high yield point, crucial for load-bearing applications in pulling and lifting. The material's inherent corrosion resistance makes it suitable for harsh or marine environments, preventing degradation over time. With dimensions of 47 inches in length and 43 inches in width, it provides a substantial surface area for fabrication into custom brackets, reinforcement plates, or structural components for cranes, hoists, winches, and other heavy-duty equipment. Its non-magnetic properties also contribute to safety in certain specialized lifting scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to cutting. 2. Cut to desired size using appropriate industrial cutting tools (e.g., plasma cutter, waterjet). 3. Fabricate and weld according to project specifications, ensuring proper post-weld cleaning to maintain corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper precautions. | Utilize tools designed for stainless steel or ensure adequate lubrication and cooling to prevent excessive heat buildup and potential material contamination. |
| Inadequate post-weld cleaning. | Thoroughly remove all heat tint and surface contaminants after welding to preserve the protective passive layer of the stainless steel and prevent premature corrosion. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom lifting hardware fabrication, Reinforcement plates for heavy machinery, Marine and offshore pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||