This 304 stainless steel stock sheet offers superior corrosion resistance and exceptional strength for demanding pulling and lifting applications. Its robust dimensions ensure structural integrity.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.627" |
| Length | 24" |
| Width | 40" |
Specified by design engineers worldwide, this 0.627-inch thick, 24-inch by 40-inch sheet is fabricated from premium 304 stainless steel. Its inherent tensile strength of approximately 520 MPa and yield strength of 205 MPa, coupled with excellent corrosion resistance, make it ideal for environments exposed to moisture, chemicals, and saltwater. This material's non-magnetic properties and ability to withstand extreme temperatures further enhance its suitability for rigorous industrial settings where reliability and longevity are paramount in pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Carefully position the sheet according to the design specifications. 3. Secure the sheet using appropriate welding, bolting, or fastening methods, ensuring alignment and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners that will corrode and compromise the joint. | Always use 304 or 316 stainless steel fasteners to match the sheet's corrosion resistance. |
| Inadequate support leading to structural failure under load. | Confirm that the supporting structure is designed to handle the full anticipated load of the pulling or lifting application. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural components for custom lifting frames, Reinforcement plates for winches and hoists, Marine-grade pulling equipment bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||