Engineered for robust performance, this 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for critical pulling and lifting operations. Its substantial dimensions ensure suitability for a wide range of industrial demands.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.577" |
| Length | 14" |
| Width | 37" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.577 inches in thickness, 14 inches in length, and 37 inches in width. Fabricated from Type 304 stainless steel, it offers superior tensile strength, yield strength, and excellent resistance to pitting and crevice corrosion in various environments. This material composition makes it ideal for applications requiring high load-bearing capacity and longevity, such as custom rigging components, reinforced structural supports in marine environments, and specialized industrial machinery parts where structural integrity under stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project requirements. 2. Prepare mounting or integration points, ensuring surfaces are clean and free of contaminants. 3. Securely fasten the stock sheet using appropriate industrial-grade fasteners and techniques suitable for the intended load and application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that do not match the stainless steel grade, potentially leading to galvanic corrosion. | Utilize fasteners made from 304 stainless steel or compatible alloys to maintain material integrity and prevent corrosion. |
| Overstressing the sheet beyond its calculated load capacity, compromising structural integrity. | Perform thorough load calculations based on the sheet's dimensions and material properties, and ensure it is not subjected to forces exceeding its design limits. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom rigging and lifting hardware fabrication, Reinforced structural components in corrosive environments, Industrial machinery support and reinforcement plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||