Robust 304 Stainless Steel stock sheet, precisely manufactured to 0.546" thickness, 15" length, and 23" width. Ideal for custom fabrication in pulling and lifting applications, offering superior corrosion resistance and structural integrity.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.546" |
| Length | 15" |
| Width | 23" |
Engineered for reliability and performance, this 304 Stainless Steel stock sheet boasts a substantial 0.546" (13.87mm) thickness, providing exceptional structural rigidity. Its dimensions of 15" (381mm) in length and 23" (584.2mm) in width offer ample material for diverse fabrication needs within the pulling and lifting category. The inherent properties of 304 stainless steel, including its excellent corrosion resistance in various environments and its robust tensile strength, make this sheet a critical component for applications demanding consistent performance under load and exposure to harsh conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions against project requirements. 2. Prepare cutting and forming tools appropriate for 0.546" thick 304 stainless steel. 3. Fabricate and integrate into the pulling or lifting apparatus according to engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized material for the expected load. | Always consult load charts and engineering specifications to ensure the chosen material thickness and grade are adequate. |
| Inadequate edge preparation for welding or joining. | Properly bevel and clean edges to ensure strong, reliable welds or mechanical connections. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting eyes, Reinforcement plates for heavy-duty pulling mechanisms, Support brackets for industrial winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||