Engineered for demanding pulling and lifting operations, this 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. Its substantial thickness and generous dimensions ensure reliable performance in challenging industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.540" |
| Length | 44" |
| Width | 39" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet features a precise thickness of 0.540 inches, a length of 44 inches, and a width of 39 inches. Composed of AISI 304 stainless steel, it exhibits excellent tensile strength, yield strength, and superior resistance to oxidation and corrosion, making it ideal for environments exposed to moisture, chemicals, or elevated temperatures. Its robust construction is critical for ensuring the integrity of lifting and pulling mechanisms, providing a stable and durable foundation for critical components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly supported and secured in its intended mounting location. 2. Align mounting holes with corresponding structural elements. 3. Fasten securely using appropriate grade stainless steel hardware, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always utilize fasteners with a tensile strength rating equal to or exceeding that of the stainless steel sheet and appropriate for the load-bearing requirements. |
| Inadequate surface preparation leading to stress points. | Thoroughly clean the mounting surface and the sheet itself. Avoid sharp edges or burrs that could concentrate stress during operation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural support for heavy-duty winches and hoists, Reinforcement plates for pulling equipment, Custom fabrication of lifting fixtures and gantries.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||