This premium 304 stainless steel stock sheet provides exceptional strength and corrosion resistance, making it ideal for critical hydraulic system components and fabrication.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.499" |
| Length | 24" |
| Width | 36" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.499 inches in thickness, 24 inches in length, and 36 inches in width. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of aggressive media, high tensile strength, and formability, ensure long-term performance in demanding hydraulic environments. This material is specifically chosen for its non-magnetic characteristics and its ability to withstand elevated pressures and temperatures typical in hydraulic circuits, preventing premature failure and contamination.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Clean the sheet surface thoroughly to remove any contaminants or protective coatings. 3. Fabricate components according to precise design drawings, ensuring all cuts, bends, and welds meet required tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel or carbon steel for hydraulic components. | Always specify and utilize 304 stainless steel or equivalent for its superior corrosion resistance and strength in hydraulic systems. |
| Inadequate surface preparation before fabrication or installation. | Thoroughly clean the 304 stainless steel sheet to prevent contamination that could compromise hydraulic fluid integrity or component performance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold blocks, Pressure vessel components, Hydraulic valve bodies, Fluid power system fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||