This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical integrity, ideal for fabricating robust components in demanding hydraulic systems where reliability is paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.475" |
| Length | 40" |
| Width | 39" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.475 inches thick, 40 inches in length, and 39 inches in width. The 304 alloy provides excellent resistance to a broad range of corrosive environments, making it suitable for hydraulic fluid handling and structural components exposed to moisture or chemicals. Its inherent strength and durability ensure longevity and performance under pressure, critical for high-performance hydraulic machinery and industrial fluid power applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Cut to required dimensions using appropriate abrasive or plasma cutting equipment suitable for stainless steel. 3. Deburr all cut edges to remove sharp fragments and ensure smooth transitions for subsequent fabrication steps.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to heat-affected zones or material degradation. | Employ carbide-tipped blades, waterjet, or plasma cutters specifically designed for stainless steel to minimize heat input and maintain material properties. |
| Inadequate edge preparation post-cutting, leaving sharp burrs that can compromise sealing surfaces or cause safety hazards. | Thoroughly deburr all cut edges using files, grinding wheels, or specialized deburring tools to achieve a smooth, safe finish. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold fabrication, Custom hydraulic cylinder components, Corrosion-resistant hydraulic fluid reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||