This robust 304 stainless steel stock sheet offers superior corrosion and temperature resistance, making it ideal for critical pressure and temperature control applications in harsh industrial settings.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.470" |
| Length | 46" |
| Width | 33" |
Designed for demanding industrial environments, this 0.470" thick stock sheet is fabricated from premium 304 stainless steel, renowned for its excellent corrosion resistance, high tensile strength, and superior performance across a wide temperature range. Its precise dimensions of 46" in length and 33" in width ensure consistent material for fabrication of critical components in pressure vessels, heat exchangers, and control systems. The inherent durability of 304 stainless steel guarantees longevity and reliability under extreme operational stresses, preventing premature failure and maintaining process integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and integrity before cutting. 2. Employ appropriate cutting tools designed for stainless steel to achieve clean edges. 3. Ensure all joining and sealing surfaces are properly prepared and cleaned prior to assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and material deformation. | Utilize carbide-tipped or diamond-edged cutting tools specifically rated for stainless steel fabrication to ensure clean cuts and minimize material stress. |
| Inadequate surface preparation before welding or sealing, compromising joint integrity. | Thoroughly degrease and remove all contaminants from surfaces intended for welding or sealing using appropriate solvents and abrasive cleaning methods. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Industrial control system enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||