This 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Its robust dimensions make it ideal for demanding pressure and temperature control applications in various industrial settings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.461" |
| Length | 41" |
| Width | 41" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a substantial thickness of 0.461 inches, with precise dimensions of 41 inches by 41 inches. The inherent properties of 304 stainless steel, including its excellent resistance to a wide range of corrosive media and elevated temperatures, make it a superior choice for applications demanding long-term integrity. This material's composition, typically featuring 18% chromium and 8% nickel, provides a passive chromium oxide layer that self-heals, ensuring robust protection. Its machinability and weldability further enhance its suitability for custom fabrication in critical pressure and temperature control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of contaminants. 2. Carefully position the stock sheet according to the system design specifications. 3. Secure the sheet using appropriate welding or fastening techniques, ensuring proper sealing for pressure containment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation before welding. | Thoroughly degrease and remove any oxides or scale from the welding area to ensure a strong, corrosion-resistant weld. |
| Using standard carbon steel fasteners. | Always use fasteners made from 304 or 316 stainless steel to prevent galvanic corrosion and maintain material integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, High-temperature ducting and piping, Heat exchanger components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||