This robust 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. Ideal for custom fabrication in pulling and lifting applications, ensuring durability in harsh environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.447" |
| Length | 23" |
| Width | 15" |
Built to exacting engineering tolerances, this 0.447-inch thick stock sheet features precise dimensions of 23 inches in length and 15 inches in width. Fabricated from AISI 304 stainless steel, it offers superior tensile strength and excellent resistance to a wide range of corrosive media, including atmospheric conditions, many organic chemicals, and inorganic salt solutions. This makes it an ideal material for fabricating custom components, reinforcement plates, and structural elements in demanding pulling and lifting equipment, marine hardware, and industrial machinery where longevity and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Identify the intended mounting points and verify compatibility with existing structures. 2. Mark and drill precise holes according to your design specifications, ensuring clean edges. 3. Securely fasten the stock sheet using appropriate grade 304 stainless steel fasteners and sealing compounds if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can lead to galvanic corrosion. | Always use 304 stainless steel grade fasteners for installation to maintain material integrity and corrosion resistance. |
| Improper hole drilling causing stress concentrations. | Drill holes cleanly and deburr edges to prevent premature failure and ensure even load distribution. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Pulling Fixture Fabrication, Reinforcement Plates for Lifting Gear, Marine Hardware Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||