Engineered for extreme durability, this 304 stainless steel stock sheet offers exceptional corrosion resistance. Its robust 0.444" thickness ensures reliable performance in demanding pulling and lifting scenarios.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.444" |
| Length | 37" |
| Width | 15" |
Specified by design engineers worldwide, this stock sheet is manufactured from premium 304 stainless steel, renowned for its superior tensile strength and excellent resistance to oxidation and corrosion in marine, chemical, and food processing environments. Dimensions are precisely held at 0.444 inches thickness, 37 inches in length, and 15 inches in width, meeting stringent industry standards for fabrication and integration into critical lifting and pulling assemblies. This material is non-magnetic in its annealed state and exhibits good formability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare edges for cutting or forming according to fabrication drawings, ensuring adherence to safety protocols. 3. Integrate sheet into the pulling or lifting assembly, confirming all connection points and load-bearing capacities.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for stainless steel. | Employ carbide-tipped or high-speed steel tooling designed for stainless steel to prevent premature tool wear and ensure clean cuts. |
| Inadequate edge preparation leading to stress risers. | Smooth and deburr all cut edges thoroughly to eliminate potential points of failure under load. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting points and brackets, Reinforcement plates for heavy-duty pulling equipment, Structural components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||