Robust 304 stainless steel stock sheet engineered for superior strength and corrosion resistance. Optimized for heavy-duty pulling and lifting applications in harsh industrial settings.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.436" |
| Length | 15" |
| Width | 36" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet boasts exceptional tensile strength and resistance to pitting and crevice corrosion due to its chromium-nickel composition. With a precise thickness of 0.436 inches, a length of 15 inches, and a width of 36 inches, it offers a substantial surface area and structural integrity for critical pulling and lifting operations. Its non-magnetic properties and ability to withstand extreme temperatures make it suitable for marine, chemical processing, and food-grade applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Position the stock sheet at the desired location, aligning any pre-drilled holes with mounting hardware. 3. Securely fasten the sheet using appropriate grade 304 stainless steel fasteners, ensuring even torque distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners (e.g., carbon steel) which can lead to galvanic corrosion. | Always use grade 304 or higher stainless steel fasteners to maintain the corrosion resistance of the entire assembly. |
| Over-tightening fasteners, which can warp or crack the sheet. | Tighten fasteners to the manufacturer's recommended torque specifications for the fastener size and material. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Reinforcement plates for pulling and lifting equipment, Custom fabricated structural components for material handling, Corrosion-resistant backing plates in marine environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||