Engineered for robust performance in demanding environments, this 304 stainless steel stock sheet offers superior strength and corrosion resistance for critical pulling and lifting applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.425" |
| Length | 37" |
| Width | 19" |
Specified by design engineers worldwide, this 0.425-inch thick stock sheet is fabricated from premium 304 stainless steel, renowned for its excellent tensile strength, ductility, and resistance to pitting and crevice corrosion. Its substantial dimensions of 37 inches in length and 19 inches in width provide ample surface area for fabrication into various components. This material composition ensures reliable performance in wet, corrosive, or high-stress environments, making it ideal for custom fabrication of pulling and lifting hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage. 2. Precisely cut to desired dimensions using appropriate cutting tools (e.g., waterjet, plasma cutter). 3. Prepare edges for welding or fastening according to fabrication drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always select 304 stainless steel for applications exposed to moisture or chemicals to prevent rust and degradation. |
| Inadequate edge preparation for welding. | Ensure edges are clean, beveled if necessary, and free from contaminants before welding to achieve strong, corrosion-resistant joints. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of heavy-duty lifting eyes, Reinforcement plates for pulling mechanisms, Submarine and marine hardware fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||