This 0.417" thick 304 stainless steel stock sheet is engineered for superior performance in demanding pressure and temperature control environments. Its inherent corrosion resistance and structural integrity ensure reliability.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.417" |
| Length | 34" |
| Width | 24" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.417 inches in thickness, 34 inches in length, and 24 inches in width. Composed of AISI 304 stainless steel, it offers excellent corrosion resistance, particularly against oxidizing acids, and maintains its mechanical properties across a wide temperature range. This makes it ideal for fabricating robust components such as heat exchanger plates, pressure vessel parts, and valve bodies where precise dimensions and material stability are critical for optimal fluid dynamics and thermal management.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating surfaces of the sheet and any associated components to remove all contaminants. 2. Carefully position the sheet according to the design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) that are compatible with 304 stainless steel and the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before joining or fabricating. | Always ensure all surfaces are meticulously cleaned and free of oils, grease, or scale to prevent weld defects or premature corrosion. |
| Using incompatible welding consumables or techniques for 304 stainless steel. | Employ welding procedures and filler materials specifically recommended for 304 stainless steel to maintain its corrosion resistance and mechanical strength. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Pressure Vessel Components, High-Temperature Ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||