Engineered for superior strength and corrosion resistance, this 304 stainless steel stock sheet is a critical component for robust pulling and lifting systems. Its precise dimensions ensure reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.381" |
| Length | 19" |
| Width | 13" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.381 inches thick, 19 inches in length, and 13 inches in width. Manufactured from Grade 304 stainless steel, it offers exceptional tensile strength, a high yield point, and superior resistance to pitting and crevice corrosion, even in marine or chemical-intensive settings. This material's inherent durability and non-magnetic properties make it ideal for custom fabrication of winch plates, anchor points, rigging hardware, and specialized lifting brackets where reliability under extreme load is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of any contaminants. 2. Position the stock sheet accurately against the mounting surface, aligning all pre-drilled holes (if applicable) or marking attachment points. 3. Secure the stock sheet using appropriate, high-strength fasteners (e.g., stainless steel bolts, rivets) rated for the intended load capacity, ensuring a tight and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners that will corrode and compromise the structural integrity of the assembly. | Always utilize 304 or 316 stainless steel fasteners to match the corrosion resistance of the stock sheet and prevent galvanic corrosion. |
| Overlooking the importance of proper load calculations for the intended application, potentially leading to material failure. | Consult engineering specifications and perform rigorous load calculations to ensure the stock sheet and its mounting system can safely handle the maximum anticipated forces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom winch plate fabrication, Reinforced lifting eye creation, Heavy-duty anchor point construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||