This 304 stainless steel stock sheet is engineered for demanding hydraulic systems. Its robust construction and 0.353" thickness provide exceptional durability and resistance to corrosive environments, ensuring reliable performance.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.353" |
| Length | 40" |
| Width | 31" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.353 inches in thickness, 40 inches in length, and 31 inches in width. Composed of Austenitic 304 stainless steel, it offers excellent corrosion resistance, weldability, and formability, making it ideal for fabricated components in hydraulic manifolds, pressure vessels, and fluid handling systems. The material's inherent strength and non-magnetic properties further enhance its suitability for critical hydraulic infrastructure, ensuring longevity and operational integrity under various pressure and environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Fabricate to required component dimensions using appropriate cutting and forming techniques. 3. Integrate into the hydraulic system according to design specifications and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel for corrosive hydraulic fluid environments. | Always specify 304 or higher stainless steel grades for components exposed to corrosive hydraulic fluids or harsh environments to prevent premature degradation. |
| Insufficient edge preparation before welding. | Thoroughly clean and bevel edges as per welding procedure specifications to ensure strong, defect-free welds in critical hydraulic component fabrication. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Component Manufacturing, Corrosion-Resistant Fluid Handling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||