Engineered for robust performance, this 304 stainless steel stock sheet provides exceptional strength and corrosion resistance. Its substantial dimensions make it ideal for custom fabrication in demanding pulling and lifting applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.352" |
| Length | 35" |
| Width | 31" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers a nominal thickness of 0.352 inches, a length of 35 inches, and a width of 31 inches. Fabricated from premium 304 stainless steel, it exhibits superior tensile strength, excellent ductility, and outstanding resistance to a wide range of corrosive environments, including marine and chemical exposures. This makes it an ideal substrate for fabricating custom pulling eyes, lifting lugs, and structural components where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all surfaces to be joined thoroughly, removing any grease, oil, or contaminants. 2. Position the stock sheet according to the design requirements, ensuring proper alignment. 3. Secure the sheet using appropriate welding, bolting, or fastening techniques as dictated by the application's load and environmental conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before welding or fastening. | Always degrease and remove all mill scale or surface imperfections to ensure strong, lasting bonds. |
| Using standard carbon steel fasteners with 304 stainless steel. | Employ fasteners specifically rated for stainless steel environments to prevent galvanic corrosion and ensure structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of lifting lugs and eyes, Structural components for marine environments, Specialized pulling apparatus and reinforcement plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||