This robust 304 stainless steel stock sheet offers superior corrosion resistance and structural integrity. Its substantial 0.349" thickness and generous dimensions (46" x 25") make it ideal for heavy-duty pulling and lifting applications in harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.349" |
| Length | 46" |
| Width | 25" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet exhibits exceptional tensile strength and formability, crucial for demanding industrial applications. The sheet measures precisely 0.349 inches in thickness, 46 inches in length, and 25 inches in width. Composed of Austenitic Stainless Steel 304, it provides excellent resistance to oxidation and corrosion in a wide range of media, including atmospheric conditions and many organic and inorganic chemicals. Its non-magnetic properties also contribute to its versatility in specialized environments. This material is widely specified for its durability, hygiene, and longevity in corrosive or sanitary settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the area is clean and free of debris. 2. Position the stock sheet according to project requirements, aligning with mounting points or structural supports. 3. Secure the sheet using appropriate fasteners and techniques for the intended pulling or lifting application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper fasteners that will corrode in the same environment. | Utilize 304 or higher grade stainless steel fasteners to maintain the integrity of the entire assembly. |
| Subjecting the sheet to excessive or uneven loads beyond its calculated capacity. | Always perform load calculations and ensure the sheet's design and installation are within safe working limits for the specific pulling or lifting task. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting lugs and brackets, Reinforcement plates for heavy-duty equipment, Components for marine and offshore pulling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||