This 0.338-inch thick 304 stainless steel stock sheet provides exceptional corrosion resistance and tensile strength. Precision-cut to 39 inches by 21 inches, it's engineered for superior performance in rigorous pulling and lifting scenarios.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.338" |
| Length | 39" |
| Width | 21" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers a robust 0.338" (approx. 8.59mm) thickness, ensuring high load-bearing capacity. Its dimensions of 39" (990.6mm) length and 21" (533.4mm) width provide ample material for fabrication. Composed of 18% chromium and 8% nickel, this austenitic alloy exhibits excellent weldability and is highly resistant to oxidation and many corrosive chemicals, making it a preferred choice for marine, chemical processing, and heavy-duty industrial lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free of any contaminants. 2. Accurately mark the desired cut lines using appropriate measuring tools. 3. Utilize suitable cutting equipment (e.g., abrasive saw, waterjet, or laser cutter) for precise fabrication. 4. Smooth all cut edges to remove burrs and sharp points for safe handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to contamination and reduced corrosion resistance. | Always use dedicated stainless steel cutting tools and ensure they are free from carbon steel residue. |
| Improper handling leading to scratches or dents that can compromise structural integrity and aesthetics. | Handle the stock sheet with care, using protective gloves and avoiding dropping or dragging it across rough surfaces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of lifting lugs and brackets, Reinforcement plates for heavy-duty machinery, Components for marine and offshore pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||