This 304 stainless steel stock sheet is engineered for superior performance in critical pressure and temperature control systems. Its robust construction ensures reliability and longevity in demanding industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.300" |
| Length | 14" |
| Width | 28" |
A high-performance industrial component, this 304 stainless steel stock sheet measures a substantial 0.300 inches in thickness, 14 inches in length, and 28 inches in width. Fabricated from grade 304 stainless steel, it offers exceptional corrosion resistance, a wide operating temperature range (-200°C to +800°C), and excellent mechanical strength suitable for environments with fluctuating pressures and extreme thermal conditions. Its non-magnetic properties and inherent durability make it ideal for fabrication into custom components for pressure vessels, heat exchangers, and critical control manifolds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare cutting and forming equipment to the required tolerances for 0.300" thickness. 3. Fabricate and integrate the component ensuring all welds and connections meet industry pressure and temperature standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-pressure applications. | Always select stock sheets with sufficient thickness and material strength rating to safely withstand the maximum anticipated operating pressure and temperature. |
| Inadequate surface preparation before welding. | Thoroughly clean the welding area to remove any contaminants, oils, or oxides that could compromise weld integrity and corrosion resistance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Custom manifold construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||