This 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength. Its robust 0.268" thickness, 42" length, and 13" width make it ideal for demanding pressure and temperature control environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.268" |
| Length | 42" |
| Width | 13" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a substantial 0.268" thickness, providing superior structural integrity for high-pressure and extreme temperature applications. Fabricated from austenitic 304 stainless steel, it exhibits excellent resistance to a wide range of corrosive media, including oxidizing acids and chlorides, ensuring longevity in harsh industrial settings. The generous dimensions of 42" length and 13" width offer ample material for custom fabrication of components such as heat exchanger plates, valve bodies, and pressure vessel linings. Its non-magnetic properties and weldability further enhance its versatility in critical engineering projects.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended service environment and operating parameters. 2. Precisely cut the sheet to the required dimensions using appropriate fabrication tools. 3. Securely fasten or weld the fabricated component into its designated position, ensuring all seals are properly engaged.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive environments. | Always select 304 stainless steel or a higher grade for applications exposed to corrosive substances to prevent premature degradation and failure. |
| Insufficient material thickness for the applied pressure or temperature. | Consult engineering stress calculations and material property charts to ensure the 0.268" thickness is adequate for the maximum anticipated operating loads. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Construction, Pressure Vessel Components, High-Temperature Ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||