This robust 304 stainless steel stock sheet offers superior strength and corrosion resistance, making it ideal for heavy-duty pulling and lifting applications where reliability is paramount.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.247" |
| Length | 16" |
| Width | 35" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a thickness of 0.247 inches, a length of 16 inches, and a width of 35 inches. Its 304 austenitic stainless steel composition provides excellent corrosion resistance, particularly against atmospheric conditions and many organic and inorganic chemicals. This material exhibits good weldability and formability, ensuring ease of integration into existing structures and fabrication processes. Its inherent strength and durability are critical for applications subjected to significant tensile forces and abrasive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean, dry, and free of contaminants. 2. Precisely position the stock sheet according to design specifications, utilizing appropriate lifting and handling equipment. 3. Secure the stock sheet using approved fastening methods and hardware, ensuring structural integrity and load-bearing capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, which can deform the sheet and compromise structural integrity. | Use calibrated torque wrenches to apply specified torque values during fastening. |
| Neglecting to deburr edges after cutting, creating potential hazards and stress concentration points. | Thoroughly deburr all cut edges using appropriate tools before installation or further fabrication. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Reinforcement plates for lifting equipment, Custom fabricated structural components for marine environments, Wear plates in heavy machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||