This 304 stainless steel stock sheet offers exceptional corrosion resistance and formability. Precisely manufactured to 0.230" thickness, 38" length, and 40" width, it's ideal for custom fabrication in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.230" |
| Length | 38" |
| Width | 40" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a nominal thickness of 0.230 inches, a length of 38 inches, and a width of 40 inches. Composed primarily of chromium (18%) and nickel (8%), it exhibits superior resistance to oxidation and a wide range of corrosive media, making it suitable for high-temperature applications and environments involving acids, alkalis, and chlorides. Its excellent formability and weldability allow for intricate designs and robust structural integrity in custom fabrication projects.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity against project requirements. 2. Prepare surfaces for cutting, bending, or welding according to fabrication drawings. 3. Integrate into the assembly following established engineering and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel in corrosive environments. | Always specify 304 stainless steel or higher for applications exposed to acidic, alkaline, or chloride-rich media to prevent premature corrosion and failure. |
| Inadequate material preparation before fabrication. | Thoroughly clean and degrease the sheet surface to remove contaminants that could compromise weld quality or introduce localized corrosion. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Customized pressure vessel components, Heat exchanger fabrication, Corrosion-resistant ductwork for industrial processes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||