This robust 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for demanding pulling and lifting applications. Its substantial thickness ensures durability under load, making it ideal for custom fabrication.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.184" |
| Length | 16" |
| Width | 46" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a precise thickness of 0.184 inches, a length of 16 inches, and a width of 46 inches. The 304 grade stainless steel offers superior corrosion resistance, particularly in marine and food processing environments, and maintains excellent mechanical properties across a wide temperature range. Its inherent strength and formability make it suitable for fabricating custom lifting eyes, hoist mounts, winch bases, and other critical structural components where safety and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Position the stock sheet according to the design specifications for the pulling or lifting apparatus. 3. Securely fasten the stock sheet using appropriate grade fasteners (e.g., stainless steel bolts and nuts) as per engineering drawings, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for critical load-bearing connections. | Always utilize fasteners that meet or exceed the load requirements specified in the engineering design, preferably of the same or higher grade stainless steel. |
| Improper edge finishing leading to stress concentration points. | Ensure all cut edges are deburred and smoothed to prevent premature fatigue failure, especially in high-stress areas. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom lifting lugs and eyes, Winch mounting plates, Hoist support structures, Marine hardware fabrication, Heavy-duty rigging components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||