This 304 stainless steel stock sheet is engineered for robust performance in pulling and lifting applications. Its superior corrosion resistance and tensile strength ensure reliability in challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.179" |
| Length | 19" |
| Width | 32" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet exhibits exceptional durability and resistance to corrosion and oxidation, making it ideal for demanding industrial environments. With a thickness of 0.179 inches, a length of 19 inches, and a width of 32 inches, it provides a substantial surface area for fabrication. The inherent properties of 304 stainless steel, including its excellent weldability and formability, allow for precise customization into various pulling and lifting components. This material's high tensile strength ensures it can withstand significant loads and stresses encountered in heavy-duty operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess the intended application and required modifications. 2. Utilize appropriate cutting and shaping tools for 304 stainless steel. 3. Ensure all fabricated components meet safety and load-bearing requirements before installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify 304 stainless steel for environments prone to moisture or chemical exposure to prevent premature rust and degradation. |
| Overlooking material thickness for the intended load. | Carefully calculate the required load capacity and select a stock sheet thickness that provides adequate safety margins. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting lugs, Reinforcement plates for pulley systems, Bespoke structural components for winches.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||