This 304 stainless steel stock sheet is engineered for demanding heating and cooling environments. Its robust construction ensures longevity and reliable performance in critical industrial applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.136" |
| Length | 32" |
| Width | 19" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. With a precise thickness of 0.136 inches, a generous length of 32 inches, and a width of 19 inches, it is ideal for fabricating critical components in HVAC systems, heat exchangers, industrial ovens, and other high-temperature or corrosive environments. The inherent properties of 304 stainless steel, including its excellent weldability and resistance to oxidation, make it a superior choice for ensuring system integrity and extended service life under continuous operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, ensuring a watertight and airtight seal if required by the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge preparation before welding. | Thoroughly clean and bevel all edges to the recommended specifications for optimal weld penetration and strength. |
| Using incompatible fasteners that can lead to galvanic corrosion. | Select fasteners made from 304 stainless steel or a material with equivalent corrosion resistance to prevent premature failure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Oven Linings, HVAC Ductwork Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||