Engineered for extreme conditions, this 304 stainless steel stock sheet delivers exceptional strength and longevity in demanding pulling and lifting scenarios. Its robust construction ensures reliable performance under significant load.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.120" |
| Length | 25" |
| Width | 25" |
Purpose-built for heavy-duty applications, this 0.120" thick stock sheet, measuring 25" x 25", is manufactured from premium 304 stainless steel. This austenitic alloy provides excellent resistance to corrosion, pitting, and crevice corrosion in harsh environments, making it ideal for marine, chemical processing, and food-grade applications where hygiene and durability are paramount. Its high tensile strength and yield strength ensure structural integrity when subjected to static and dynamic loads, critical for components in lifting mechanisms, rigging, and custom fabrication for industrial material handling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., shear, laser cutter) for precise dimensioning. 4. Prepare edges for welding or fastening as required by the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify 304 stainless steel for applications exposed to moisture, chemicals, or saltwater to prevent premature corrosion and failure. |
| Insufficient material thickness for the intended load. | Perform load calculations and consult engineering drawings to ensure the 0.120" thickness is adequate for the maximum anticipated forces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of rigging hardware, Reinforcement plates for lifting points, Components for conveyor systems in wet environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||