This premium 304 stainless steel stock sheet provides exceptional strength and corrosion resistance, making it the ideal material for demanding pulling and lifting applications. Engineered for reliability and longevity in harsh environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.105" |
| Length | 30" |
| Width | 39" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a precise 0.105" thickness, a 30" width, and a 39" length. Composed of a minimum of 10.5% chromium and 8% nickel, it exhibits excellent resistance to oxidation and corrosion, crucial for environments exposed to moisture, chemicals, or saltwater. Its inherent strength and formability allow for custom fabrication into various components for marine hardware, industrial lifting equipment, and custom fabrication projects where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Carefully position the sheet for the intended application, considering load-bearing requirements. 3. Securely fasten the sheet using appropriate industrial-grade hardware and methods, verifying alignment and stability.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet in environments exceeding its corrosion resistance capabilities without proper surface treatment or coatings. | Consult material compatibility charts and consider additional protective measures if the application involves highly aggressive chemicals or extreme temperatures. |
| Overloading the fabricated component beyond the structural integrity of the 0.105" thick stainless steel. | Perform rigorous load testing and adhere to engineering calculations to ensure the fabricated part can safely withstand the intended operational forces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of marine hardware, Components for industrial lifting equipment, Reinforcement plates for structural applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||