This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Its robust construction makes it ideal for demanding pulling and lifting applications where reliability is paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.104" |
| Length | 37" |
| Width | 18" |
Built to exacting engineering tolerances, this 0.104" thick stock sheet boasts dimensions of 37" in length and 18" in width. Fabricated from high-grade 304 stainless steel, it offers excellent tensile strength and a yield strength of approximately 205 MPa (30,000 psi). Its austenitic structure provides inherent corrosion resistance, particularly against atmospheric and organic acids. This makes it suitable for environments requiring frequent cleaning or exposure to mild chemical agents. The precise dimensions ensure compatibility with standard fabrication processes and guarantee predictable performance in structural or load-bearing roles within pulling and lifting apparatus.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or defects prior to fabrication. 2. Cut to desired dimensions using appropriate metal cutting tools. 3. Fabricate and integrate into the pulling or lifting assembly according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always select 304 stainless steel for applications exposed to moisture or chemicals to prevent premature rust and structural degradation. |
| Over-stressing the sheet beyond its yield strength. | Ensure that the calculated loads applied to the fabricated component do not exceed the material's yield strength of 205 MPa to prevent permanent deformation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Reinforcement plates for lifting slings, Structural components in winches and hoists, Custom fabrication of pulling fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||